Canon MV6iMC Скачать руководство пользователя страница 122

Страница: 122 / 171

122

Using a Memory Card

1. With a still image/movie in the display, press the SET button to

open the FILE OPER. menu.

• PROTECT

, PRINT MARK

, and IMAGE ERASE settings appear.

• If you select

RETURN, the menu disappears from the display.

2. Select PROTECT

and press the SET button.

• The

protect mark appears on the still image/movie.

• Now you are unable to erase this still image/movie.
• Press the SET button again to cancel it.
• If you select

RETURN, the menu disappears from the display.

• To cancel image protection, select PROTECT

and press the SET button.

disappears and now you can erase this still image/movie.

2. Select PRINT MARK

, set the number of prints with the selector

dial and press the SET button.

• The

print mark appears on the still image.

• If you select

RETURN, the menu disappears from the display.

• To cancel a print mark, select PRINT MARK

, set the number of prints to

0 (Zero) with the selector dial and press the SET button.

disappears.

2. Select IMAGE ERASE and press the SET button.

• ERASE THIS IMAGE? NO YES appears in the display.
• If you select

RETURN, the menu disappears from the display.

3. Select YES and press the SET button.

• The still image/movie is erased.
• One still image/movie before the erased still image/movie appears.

To erase a still image/movie

To mark a still image for printing (Print Mark)

To protect a still image/movie

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY (VCR)

File Operation (FILE OPER.)

Downloaded From VideoCamera-Manual.com Manuals

Содержание MV6iMC












































































































































































Результаты поиска

Содержание MV6iMC

Отзывы:

Похожие инструкции для MV6iMC

Бренды по названию

Популярные бренды

Canon MV6iMC, Инструкция по эксплуатации

Результаты поиска

Содержание MV6iMC

Отзывы:

Похожие инструкции для MV6iMC

Бренды по названию

Популярные бренды