Canon MV6iMC Скачать руководство пользователя страница 102

Страница: 102 / 171

Inserting the Card

1. Turn off the camcorder.

2. Open the cover.

3. Insert the memory card all the way into the memory card slot.

4. Close the cover.

• Do not close the cover forcefully without having the card correctly inserted.

Card access
indicator

102

Using a Memory Card

You can use

SD Memory Cards or a

commercially available MultiMediaCards
with this camcorder. The SD Memory Card
has a protect switch for prevent accidental
erasure.

Cautions:

• This camcorder is compatible with SD Memory Cards or MultiMediaCards

only. Do not use any other types of memory cards.

• Turn off the camcorder before inserting or removing the memory card.

Otherwise it may result in data damage.

• Do not touch the memory card terminals.
• If you use memory cards other than the supplied one, make sure to format them

with the camcorder (

140).

• For instructions on how to connect the camcorder to the computer, see

Connecting to a Computer using a USB Cable (

141).

Inserting and Removing the Memory Card

Terminals

Protect
switch

Removing the Card

Do not forcefully remove the memory card without first pushing it in.

1. Turn off the camcorder.

• Make sure that the card access indicator is not flashing.

2. Open the cover.

3. Push the memory card to release it. Remove the memory card.

4. Close the cover.

Downloaded From VideoCamera-Manual.com Manuals

Содержание MV6iMC












































































































































































Результаты поиска

Содержание MV6iMC

Отзывы:

Похожие инструкции для MV6iMC

Бренды по названию

Популярные бренды

Canon MV6iMC, Инструкция по эксплуатации

Результаты поиска

Содержание MV6iMC

Отзывы:

Похожие инструкции для MV6iMC

Бренды по названию

Популярные бренды