manualshive.com logo in svg

Canon MultiPASS C530, Руководство пользователя, Страница: 331 / 383

Поделиться
Скачать
Canon MultiPASS C530 Скачать руководство пользователя страница 331

Errors occur frequently while sending or receiving.

The telephone lines may be in poor condition, or you may have a poor connection.

■

Lower the transmission or reception speed. (If you are using the Desktop Manager, see the

MultiPASS Desktop Manager Software Guide

. If you are using the operation panel, see the

Stand-alone Fax Manual

.)

The sending fax machine may not be functioning properly.

■

Transmit or receive to another fax machine. Call the sender and have them make sure the top
cover and scanning glass on their fax machine are clean.

Cannot receive a fax automatically.

The MultiPASS may not be set to receive automatically.

■

For the MultiPASS to receive faxes automatically, the receive mode must be set to FAX ONLY
MODE, Fax/Tel Mode, or ANS.MACHINE MODE. If you have set ANS.MACHINE MODE,
confirm that an answering machine is connected to the MultiPASS and that it is turned on
with an outgoing message properly recorded.

The MultiPASS may have a document stored in memory.

■

Print out any faxes stored in memory (see 

page 5-29

).

The MultiPASS Desktop Manager may have received the fax.

■

Check the In Box of the Desktop Manager (see the 

MultiPASS Desktop Manager Software

Guide

).

Chapter 8

Troubleshooting

8-36

Содержание MultiPASS C530
































































































































































































































































































































































































Отзывы:

Нет отзывов