manualshive.com logo in svg

Canon MultiPASS C530, Руководство пользователя, Страница: 250 / 383

Поделиться
Скачать
Canon MultiPASS C530 Скачать руководство пользователя страница 250

n

●

The MultiPASS C560 memory can store up to approximately 80 pages and MultiPASS C530
memory can store up to approximately 42 pages (based on ITU-T/CCITT No. 1 Chart,
standard mode).

●

You can set the MultiPASS not to store faxes in memory if a problem occurs during reception.
If you are using the MultiPASS Desktop Manager, see the online 

MultiPASS Desktop Manager

Software Guide

. If you are using the operation panel, see the online 

Stand-alone Fax Manual

.

●

Once the pages are printed, they are deleted from memory.

●

If the memory becomes full, you will not be able to receive the remaining pages. Contact the
other party and request that they send the fax again.

Chapter 6

Receiving Faxes

6-15

Содержание MultiPASS C530
































































































































































































































































































































































































Отзывы:

Нет отзывов