manualshive.com logo in svg

Canon MultiPASS C530, Руководство пользователя, Страница: 326 / 383

Поделиться
Скачать
Canon MultiPASS C530 Скачать руководство пользователя страница 326

Multiple sheets load into the unit at the same time.

Paper may not be loaded correctly.

■

Make sure the paper stack is loaded properly in the multi-purpose tray, and that the paper
guide is adjusted correctly (see 

page 2-22

).

Sheets of paper may be sticking together.

■

Be sure to fan the paper stack before placing it in the multi-purpose tray (see 

page 2-20

).

The multi-purpose tray may contain too many sheets.

■

Make sure the paper stack in the multi-purpose tray does not exceed the paper limit mark 
(

) (see 

page 2-21

).

■

Do not load more than approximately 100 sheets — 20 lb. (75 g/m

2

) paper 

— 

of plain paper

in the multi-purpose tray.

■

Do not force the paper stack into the multi-purpose tray.

Different types of paper may be loaded in the multi-purpose tray.

■

Load just one type of paper.

■

Make sure you are loading paper that meets the paper requirements for the unit (see 

page 2-2

).

Chapter 8

Troubleshooting

8-31

D

Содержание MultiPASS C530
































































































































































































































































































































































































Отзывы:

Нет отзывов