![background image](http://html.mh-extra.com/html/canon/microfilm-scanner-800ii/microfilm-scanner-800ii_instructions-manual_63041031.webp)
– 29 –
Before You Begin...
●
Choosing a Scanner
Before performing scanning, choose the MicrofilmScanner
800II by following the procedure below.
1
Click “Select Scanner” from the “File” menu.
The “Select Source” dialog appears.
2
Select “Canon MS800” in source section, then click
“Select”.
The “Select Source” dialog appears.
●
Performing Scanning
Follow the procedure below to perform scanning.
For details on scanning methods and procedures, refer to
CapturePerfect 1.0 Help.
1
Click “Select Scanner” from the “File” menu to set the
scanner.
2
Select the scan command from the “File” menu to
perform scanning.
●
Closing CapturePerfect 1.0
1
Select “Exit” from the “File” menu on menu bar.
CapturePerfect 1.0 closes.
IMPORTANT
When the scanner is scanning or some operation is
pending after scanning has begun (such as when
scanning has been interrupted), the mouse pointer
changes to an hourglass. If the mouse pointer ap-
pears as an hourglass while the scanner is not scan-
ning, this means the previous scanning operation has
not been completed. From the “File” menu, click
“Cancel Scanning” to cancel the hourglass, then
close CapturePerfect 1.0.
CE-IE-323-01
07.5.14, 11:06
Page 29
Adobe PageMaker 6.5J/PPC