(13/34)
No.
Name
Function
Remarks
5 LAN
Electric check of the wired
LAN board and line
connection
Not used. “skip!” will be displayed when selected.
6 WLAN
Electric check of the
wireless LAN board and
connection
For the MG3100 series, MG3200 series, MG4100 series,
and MG4200 series only.
When no problems are detected in the electric
connection, “success!” is displayed.
When a problem is detected in the electric connection,
“failure!” is displayed.
Suspected causes of failure:
- The WLAN FFC is disconnected.
- The WLAN board or the FFC is faulty.
-The logic board is faulty.
7 Card Board
Electric check of the card
board connection
For the MG4100 series and MG4200 series only.
When no problems are detected in the electric
connection, “success!” is displayed.
When a problem is detected in the electric connection,
“failure!” is displayed.
Suspected causes of failure:
- The card board FFC is disconnected.
- The card board or the FFC is faulty.
- The logic board is faulty.
Note: If the Access lamp does not turn on when a
memory card is inserted in the slot, it is likely that
the memory card itself or the card board is faulty.
8 PictBridge
Electric check of the
PictBridge board connection
Not used. “skip!” will be displayed when selected.
How to use the
Auto
tab:
i. Preparation
- Set three sheets of A4 or Letter sized paper in the front tray (for the test items of
Test Print
,
EEPROM Print
, and
Copy
).
- Set a document (any desired one) on the platen glass for copying.
ii. Operation
- Select the test item(s).
- For
EEPROM Print
or
Copy
, double-click
Parameter1
. The dialog box opens for selecting the
paper source. Select
Cassette
.
- Click
Start
. The selected test(s) will be performed. (The test time is approx. 2 minutes in total
when all the test items are selected.)
- The test result (“success”, “failure”, or “skip” for non-supported function) will be indicated on the
right side of each test item as shown below.
- Confirm that EEPROM print or copying is performed properly.
easyfixs.blogspot.com
