Canon ME20F-SHN, Руководство по эксплуатации кнопок

Страница: 38 / 44

Menu Options
38
[Audio/Video Setup] menu
[Other Functions] menu
Menu item Submenu / Setting options
[MIC Power] [On], [Off]
When this setting is set to [On], the camera supplies power to a plug-in power
microphone connected to the MIC terminal (
A
Setup Guide ).
IMPORTANT
• Supplying power to a microphone without plug-in power functionality may
damage the microphone.
[1kHz Tone] [-12dB], [-18dB], [-20dB], [Off]
Outputs a 1-kHz audio reference signal from the 3G/HD-SDI terminal and HDMI OUT
terminal.
[3G-SDI Mapping] [Level A], [Level B]
Allows you to select a 3G-SDI mapping level, as defined by the SMPTE ST 425-1
standard, for the video output signal of the 3G/HD-SDI terminal.
[Rec Command] [Activate] [On] , [Off]
When this setting is set to [On], you can use an assignable button set to [External
Rec] or an optional RC-V100 Remote Controller to output a recording command to
an external recorder connected to the camera to start or stop recording (
A
Setup
Guide ).
[Remove OSD] [On], [Off]
When this setting is set to [On], the camera's onscreen displays will be turned off
automatically while a recording command is being output.
Menu item Submenu / Setting options
[Reset]
NOTES
• For details about how to initialize the camera using RESET/REBOOT switch, refer to
Setup Guide .
[All Settings] [Cancel] , [OK]
Resets all the camera's settings to default settings, except for a part of network
settings, date/time, and hour meters (
A
40).
[Camera Settings] [Cancel] , [OK]
Resets the white balance, iris, gain, shutter speed, ND filter, custom picture, focus
limit and other shooting-related settings to default settings.