270
Trouble?
Unable to complete WPS.
- Turn off the camcorder and access point (wireless router).
After a short while, turn them on again and try again. If the
problem persists, perform setup using the [Search for
Access Points] option (
A
Unable to complete WPS. Try the operation again.
- Some access points require pressing and holding the Wi-Fi
Protected Setup (WPS) button. For details, refer to the
instruction manual of your access point.
- Make sure to touch [OK] on the camcorder’s screen within
2 minutes of activating the Wi-Fi Protected Setup signal on
the access point, whether by pressing the button or by
entering the PIN code.
Unable to connect
- Cordless phones, microwave ovens, refrigerators and other
appliances may interfere with the wireless signal. Try using
the camcorder in a location farther away from such appli-
ances.
Unable to connect to the server
- The camcorder could not access the external server used
for the Monitor while Out function. Make sure the access
point is correctly connected to the Internet.
- Check that
1
>
q
>
[Date/Time] is set to the correct
date and time.