Canon LEGRIA HF R46, Инструкция по эксплуатации

Страница: 163 / 189

Additional Information
Š 163
Cannot record
- You cannot capture video snapshot scenes from scenes recorded or edited using another
device and then transferred to a memory card connected to the computer.
- There is a problem with the memory. If this message appears often without apparent reason,
contact a Canon Service Center.
:
/
9
/
8
Cannot record Cannot access the built-in memory
- There is a problem with the built-in memory. Save your recordings (
A
108) and initialize the
built-in memory using the [Complete Initialization] option (
A
31). If the problem persists,
contact a Canon Service Center.
Cannot record Check the memory card
- There is a problem with the memory card. Save your recordings (
A
108) and initialize the
memory card using the [Complete Initialization] option ( A 31). If the problem persists, use a
different memory card.
:
/
9
/
8
Cannot record movies in the built-in memory Initialize only using the
camcorder
- The camcorder’s built-in memory was initialized using a computer. Initialize the built-in mem-
ory with this camcorder (
A
31).
Cannot record movies on this memory card
- Movies cannot be recorded on a 64 MB or smaller memory card. Use a recommended mem-
ory card (
A
25).
Cannot record movies on this memory card Initialize only using the camcorder
- The memory card in the camcorder was initialized using a computer. Initialize the memory
card with this camcorder (
A
31).
Cannot save the canvas
- Cannot save your [Pens and Stamps] drawings on the memory. Save your recordings
( A 108) and initialize the memory ( A 31).
Charge the battery pack
- Battery pack is exhausted. Charge the battery pack.
Check the memory card
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
- A memory card error occurred. The camcorder cannot record or display the image. Try remov-
ing and reinserting the memory card, or use a different memory card.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card
(
A
25).
- If after the message disappears, appears in red, perform the following: Turn off the cam-
corder and remove and reinsert the memory card. If turns back to green you can resume
recording/playback. If the problem persists, save your recordings ( A 108) and initialize the
memory card (
A
31).
COP
Y