manualshive.com logo in svg

Canon LBP710Cx, Руководство пользователя

Поделиться
Скачать
Canon LBP710Cx Скачать руководство пользователя страница 872

The specified file does not exist or the file path is incorrect. Try to specify the path again.

The contents of the file for the license to install are incorrect or information is missing. Check the 
file.

Cannot install this license because the specified license does not correspond to this application. 
Try to specify a path for the license file again.

Cannot install this license because the number of license file ID logs that can be saved has 
exceeded the limit. Contact your service representative.

Cannot install because a used license file is specified. Try to specify the file again.

The specified license does not match this device. Specify an installable license.

<

The specified file does not exist or the file 

path is incorrect. Try to specify the path again.

>

<

The contents of the file for the license to 

install are incorrect or information is missing. 
Check the file.

>

<

Cannot install this license because the 

specified license does not correspond to this 
application. Try to specify a path for the license 
file again.

>

<

Cannot install this license because the 

number of license file ID logs that can be saved 
has exceeded the limit. Contact your service
representative.

>

<

Cannot install because a used license file is 

specified. Try to specify the file again.

>

<

The specified license does not match this 

device. Specify an installable license.

>

<

Could not cancel installation. Installation has 

been successfully completed.

>

<

Cannot install the license because another 

application is being installed, or the firmware 

being updated. Please wait a moment and then 
try again.

>

<

Cannot disable the license file because this 

application has been started. Disable the 

license file after stopping the application.

>

<

Error: <Error Details>

>

Problem

The file does not exist on the specified path or the file path is incorrect.

Action

Specify the file path correctly.

Problem

Either the content of the file is not correct or information is missing.

Action

This license file cannot be installed. Contact the application developer.

Problem

The specified license file does not correspond to the application, so they cannot be 

installed.

Action

Specify the license file that corresponds to the application.

Check to make sure that the manifest file listed inside the license file is correct.

Problem

The license file cannot be installed because the number of license file ID information logs 

contained in the license file exceeds the number that can be saved.

Action

Contact your local authorized Canon dealer or sales representatives.

Problem

According to the specifications, a license file which is already installed cannot be installed 
again. The specified license file has already been installed.

Action

Since the specified license file cannot be installed, specify another file.

Errors Relating to the [License Management] Page

12

Содержание LBP710Cx































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды