Canon iPF9000 series, Руководство по обслуживанию

Страница: 141 / 432

Chapter 2
2-33
e) Subtank
The subtank installed under each ink tank complements the work of the ink tank, agitating the ink in the tank.
If the ink tank runs out of the ink while printing, the ink stored in the subtank is available, allowing the ink tank to be replaced without having to stop printing.
f) Ink supply valves
Ink tank supply valves are located halfway between the ink tanks and the ink tubes. These valves prevent the leakage of inks that might otherwise be caused by the
opening of the ink tubes on the side of the ink tanks during their replacement.
The ink supply valves are caused to open and close by the valve open/close mechanism that is activated by driving the valve motors.
The ink tank unit consists of tank bases each organized into one group of six colors, and six-color ink tubes.
The color-specific ink supply valves are linked with the valve cams so they will open and close at the same time for all colors.
F-2-16
T-2-7
[1] Agitation cam sensor [2] Valve motor
[3] Valve open/closed detection sensor [4] Agitation cam
[5] Ink tube [6] Ink supply valve
[7] Link [8] Valve cam
[9] Ink discharge tube
[1]
[2]
[3]
[4]
[9] [8] [7] [6] [5]