Canon iPF9000 series, Руководство по обслуживанию

Страница: 63 / 432

Chapter 1
1-47
[Adjust Printer]
[Interface Setup]
[Maintenance]
Setting Item Description, Instructions
[Auto Head Adj.] [Standard Adj.] Choose Yes to have the printer print and read a test pattern for the automatic
adjustment of Printhead alignment relative to the printing direction.
[Advanced Adj.] Choose Yes to have the printer print and read a test pattern for the automatic
adjustment of Printhead alignment relative to the nozzle and printing direction.
[Auto Print] Choose On to have the printer automatically execute the Advanced Adj. operations
after you replace the Printhead.
[Manual Head Adj] Choose Yes to print a test pattern for adjustment of Printhead alignment relative to
the printing direction. Enter the adjustment value manually based on the resulting
pattern.
[Auto Band Adj.] [Standard Adj.] Choose Yes to have the printer print and read a band adjustment test pattern for
automatic adjustment of the feed amount.
[Advanced Adj.] Choose this option when using paper other than genuine Canon paper, or paper for
purposes other than checking output.
Choose Yes to have the printer print and read a band adjustment test pattern for
automatic adjustment of the feed amount. Note that this function takes more time
and requires more ink than Standard Adj.
[Manual Band Adj] Choose Yes to print a test pattern for adjusting the feed amount based on the paper
type.
[Adjust Length] Choose Yes to print a test pattern for adjustment relative to paper stretching or
shrinkage, after which you can enter the amount of adjustment.
Setting Item Description, Instructions
[EOP Timer] Specify the timeout period before cancellation of print jobs that cannot be
received by the printer.
[TCP/IP] [TCP/IP] Specify the TCP/IP protocol settings. To apply your changes, choose Register
Setting.
[IP Mode] Choose whether the printer IP address is configured automatically or a static IP
address is entered manually.
[Protocol] [DHCP] Specify the protocol used to configure the IP address automatically.
[BOOTP]
[RARP]
[IP Setting] [IP Address] Specify the printer network information when using a static IP address.
Enter the IP address assigned to the printer, as well as the network subnet mask
and default gateway.
[Subnet Mask]
[Default G/W]
[NetWare] [NetWare] Specify the NetWare protocol. To apply your changes, choose Register Setting.
[Frame Type] Specify the frame type to use.
[Print Service] Choose the print service.
[AppleTalk] Specify whether to use the AppleTalk protocol. To apply your changes, choose
Register Setting.
[Ethernet Driver] [Auto Detect] Specify the communication method. To apply your changes, choose Register
Setting.
Choose On for automatic configuration of the LAN communication protocol.
Choose Off to use settings values of Comm.Mode and Ethernet Type.
[Comm.Mode] Choose the LAN communication method.
[Ethernet Type] Choose the LAN transfer rate.
[Spanning Tree] Choose whether spanning-tree packets are supported over the LAN.
[MAC Address] Displays the MAC address.
[Init. Settings]
Execute? is displayed if you press the button. Choose OK to restore the
network settings to the default values.
Setting Item Description, Instructions
[Maint. cart.] When replacing the Maintenance Cartridge, choose Yes and follow the instructions on the screen.
[Replace P.head] Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low.
When replacing the Printhead, choose Yes and follow the instructions on the screen.
[Repl. S. Cleaner] When replacing the Shaft Cleaner, choose Yes and follow the instructions on the screen.
[Change Cutter] When replacing the Cutter Unit, choose Yes and follow the instructions on the screen.
You can also reset the cut counter after the Cutter Unit is replaced.
[Move Printer] When transferring the printer to another location, choose the level of transfer and follow the instructions on
the screen.