█
In an Emergency
•
If the printer emits smoke or strange odors, continuing to use the printer may cause a
fi
re or
electrical shock. Switch the printer off immediately and remove the power plug from the power
outlet. Contact the nearest service center.
█
Cleaning the Printer
•
For cleaning, use a cloth dampened in water. Never use
fl
ammable solvents such as alcohol,
benzene, or thinner. If these substances come into contact with electrical components inside
the printer, there is a risk of
fi
re or electrical shock.
█
Pacemakers
•
This printer generates a low-level magnetic
fi
eld. Anyone wearing a pacemaker who
experiences discomfort while working around the printer should leave the area. Consult a
physician before continuing to work around the printer.
█
Printer location
•
Never install the printer on an unstable or vibrating surface. If it falls over, this could cause
personal injury.
•
Never set up the printer in a location that is exposed to high humidity or large amounts of dust,
or exposed to direct sunlight, high temperature, or open
fl
ame. This could cause a
fi
re or
electrical shock. Use the printer location in an environment where temperature and humidity
are within the ranges of 15 Degrees C to 30 Degrees C (59 Degrees F to 86Degrees F) and 10
to 80% RH (with no condensation).
•
Never place the printer on a heavy wool or shag carpet. The
fi
bers may enter the printer
and cause a
fi
re.
•
Keep the area around the power outlet clear of items so that you can disconnect the power
cable immediately if the printer starts operating abnormally. In the event of a printer malfunction,
remove the power cable from the outlet as soon as possible to prevent
fi
re and electrical shocks.
•
Do not install the printer near sources of strong electromagnetic
fi
elds, whether equipment
that generates such
fi
elds or places where such
fi
elds occur. This could damage the printer
or cause malfunction.
█
Moving the Printer
•
The weights of main printer units are as follows:
•
iPF710: 64 Kg
Moving the printer requires at least three people, one person on each side of the unit. Be
careful to avoid back strain and other injuries.
•
When moving the printer,
fi
rmly grasp the
Carrying handles
located on the bottom surface at
both sides. Holding the printer at other positions is dangerous and poses a risk of injury and
damage if the printer is dropped.
3
