Note
•
For details on supported sizes and types of the roll that can be loaded, see the
Paper
Reference Guide
.
•
Cut the edge of the roll paper if it is uneven, dirty, or has tape residue.
Uneven, dirty, or sticky edges may cause feeding problems and affect the printing quality.
Be careful not to cut through any barcodes printed on the roll.
•
Wind up the roll so that the edge is even across the roll.
•
After pressing the
Load/Eject
button, you can refer to instructions on the
Display
Screen
as you load the paper.
1
You can switch the paper source between the roll and the sheet by pressing the
Feeder Selection
button. Each time you press this button, the paper source switches
between the roll (indicated by the
Roll Media lamp
) and the sheet (indicated by
the
Cut Sheet lamp
).
Press the
Feeder Selection
button to activate the
Roll Media lamp
(a).
11
