Note
•
If the
Platen
is dirty, clean inside the
Top Cover
.
•
After pressing the
Load/Eject
button, you can refer to instructions on the
Display
Screen
as you load the paper.
1
You can switch the paper source between the roll and the sheet by pressing the
Feeder Selection
button. Each time you press this button, the paper source switches
between the roll (indicated by the
Roll Media lamp
) and the sheet (indicated by
the
Cut Sheet lamp
).
Press the
Feeder Selection
button to activate the
Cut Sheet lamp
(a).
2
Remove the
Roll Holder
from the printer and remove
Basket Fastener A
(a) from
the
Stand Stay
(b).
18
