Canon iP1900 Series, Основное руководство

Страница: 303 / 342

Advanced Guide >
Troubleshooting
> Paper Does Not Feed Properly
Paper Does Not Feed Properly
Check 1: Make sure of the following when you load paper.
When loading two or more sheets of paper, align the edges of the sheets before loading.
When loading two or more sheets of paper, make sure that the paper stack does not exceed the
paper support load limit.
However, proper feeding of paper may not be possible at this maximum capacity depending on
the type of paper or environmental conditions (either very high or low temperature and humidity).
In such cases, reduce the sheets of paper you load at a time to less than half of the paper
support load limit.
Always load the paper in portrait orientation, regardless of the printing orientation.
When you load the paper, load the paper with the print side facing UP. Align the paper stack
against the right side of the Rear Tray and slide the Paper Guide so that it just touches the left
edge of the stack.
Loading Paper
Check 2: Check to see if the paper you are printing on is too thick or
curled.
Loading Paper
Check 3: Make sure of the following when you load envelopes.
When printing on envelopes, refer to
Loading Paper , and prepare the envelopes before printing.
Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are
placed in landscape orientation, they will not feed properly.
Set the Paper Thickness Lever to the right.
Loading Paper
Check 4: Remove any foreign objects from the Rear Tray.
Check 5: Turn off the printer, open the Front Cover, and remove the
foreign object.
Be careful not to touch the components inside the printer.
Check 6: Clean the Paper Feed Roller.
Routine Maintenance
note
Cleaning the Paper Feed Roller will wear the roller, so perform this procedure only when
necessary.
Page top
Стр . 303 из 342 стр . Paper Does Not Feed Properly