Canon IMAGERUNNER ADVANCE C5051, Начало работы

Страница: 94 / 252

5
Settings Common to the Network Protocols
Connecting the Machine to a Computer or Network 5-4
When connecting the interface cable or network cable, be sure to observe the following precautions to avoid electrical shock .
Turn OFF the machine's main power switch before disconnecting the power cord from the power outlet . (See Chapter 1,
"Before You Start Using This Machine ." )
Turn OFF the computer and disconnect the power cord from the power outlet .
You cannot use the machine as a repeater, bridge, or gateway.
If two or more machines are on an AppleTalk network, they should be switched 'ON' 10 seconds or more apart.
The machine can automatically detect the type of Ethernet (10Base-T, 100Base-TX, or 1000Base-T).
If you are using a mixed 10Base-T/100Base-TX/1000Base-T environment, devices on the network (hubs, routers, etc.) must support the
mixed environment. For more information, consult your local authorized Canon dealer.
After connecting the network cable, perform the following operations. (For more information, see the relevant descriptions.)
Set the date and time, and System Manager settings. (See e-Manual > Settings/Registration and Security.)
Set the network settings.
Install a driver if necessary. (See Chapter 12, “Before Printing from Computers,” or Chapter 13, “Before Sending Faxes from Computers.”)
Install a utility if necessary. (See the manuals provided with the utility.)
-
-
•
•
•
•
•
-
-
-
-