Canon IMAGERUNNER ADVANCE C5051, Начало работы

Страница: 87 / 252

4
Before Connecting to a Network
Checking Your Network Environment
4-9
Checking Your Network Environment
Refer to the following examples to confirm the network environment that is connected to the machine, and then perform the
necessary operations for that environment.
If you are using the imagePASS or the PS-GX, see the manual provided with the imagePASS or the PS-GX.
If you are using the imagePASS or the PS-GX, some functions are not available with this machine. For details, see the manual provided with
the imagePASS or the PS-GX.
Sample Windows Network
In a Windows network environment, the TCP/IP or NetBIOS (NetBIOS over TCP/IP) protocol can be used. Multiple protocols can
be used at the same time.
In addition to IPv4 (Internet Protocol Version 4), the machine also supports IPv6 (Internet Protocol Version 6), and has a dual
stack configuration that enables it to communicate with both IPv4 networks and IPv6 networks. You can select whether to
use the functions of IPv4 or IPv6. You can also enable the functions of both IPv4 and IPv6. The IPv4 network and IPv6 network
used by the machine supports IPSec (Security Architecture for Internet Protocol). (See e-Manual > Network.) For information
on the optional products required to use the IPSec function, see e-Manual > Optional Products.
To use the e-mail/I-fax function, the TCP/IP protocol is required.
After configuring the settings in accordance with Chapter 5, "Settings Common to the Network Protocols," see the following,
depending on the protocol:
Chapter 6, "Using a TCP/IP Network"
Chapter 8, "Using an SMB/CIFS Network"
The machine does not support NetBEUI.
If you are using the imagePASS or the PS-GX, some functions are not available with this machine. For details, see the manual provided with
the imagePASS or the PS-GX.
•
•
•
•
•
•