Canon IMAGERUNNER ADVANCE C5051, Начало работы

Страница: 219 / 252

15
Managing the Machine from a Computer
Before You Start the Remote UI
15-3
Before You Start the Remote UI
Before you start the Remote UI, perform the following:
Specify the Network Settings
Specify the settings under Network in Preferences (from the Settings/Registration screen) and find out the machine's IP address. If you do
not know the machine's IP address, consult your network administrator. (See “Protocol Settings,” on p. 6-3.)
Enable the Remote UI
Set Remote UI in Management Settings (from the Settings/Registration screen) to 'On'. It is also recommended that Device Information
Settings in Device Management (from the Settings/Registration screen) is configured.
Connection via a proxy server is not possible. If your system environment has a proxy server, perform the following setting. (Settings vary
according to the system environment, consult your network administrator.)
Enter the IP address of the machine into Exceptions in the web browser proxy server settings.
You must set your web browser to enable all cookies and use JavaScript. Otherwise, you will not be able to change the machine's settings
using the Remote UI.
If the control panel of the machine is being used for a particular operation and if you use the same operation on the Remote UI, the last
setting is activated.
If multiple Remote UIs are running simultaneously, the latest setting that was made is enabled. It is recommended that only one Remote
UI be running at a time.
To enter characters from a web browser, use the characters that you can enter from the touch panel display of the machine. If you use the
other characters, they may not be displayed/recognized properly on the machine.
■
■
•
-
•
•
•
•