manualshive.com logo in svg

Canon imagerunner advance 4525i, Руководство по обслуживанию

Поделиться
Скачать
Canon imagerunner advance 4525i Скачать руководство пользователя страница 537

04-1976

-

Receptacle error detection alarm: High Capacity Cassette

A. Operation / B. Cause /

C. Remedy

Cause: Error in the sensor in the receptacle
Detection condition/timing:
- When paper stack was not detected three times within the specified period of time while shifting
a paper stack
- When Right Deck paper loading detection failed three times although paper stack shift detection
was turned ON within the specified period of time while shifting a paper stack
- When the Division Plate detection failed three times although the Division Plate Solenoid was
turned ON while shifting a paper stack
- When the Lifter HP detection failed three times within the specified period of time while the Lifter
was moving to the HP
Movement/symptom: While failure has occurred (an alarm has occurred), the target paper source
cannot be used because it is in no paper state.
Measures:
- Check for any foreign matter in the receptacle.
- Check the connector and the cable connector of the receptacle.
- Check the motor, gear and timing belt for shifting paper stack in the receptacle.
- Check the Paper Stack Shift Sensor in the receptacle.
- Check the Division Plate Solenoid and the Division Plate Sensor in the receptacle.
- Check the Right Deck and the Lifter Sensor in the receptacle.
- Adjust the paper settings by referring to the Service Manual [High Capacity Cassette Pedestal >
Adjustment > Switching the Size between LTR and A4].
Method for clearing the alarm
1. Perform a remedy for the failure.
2. Place paper in the Left Tray with no paper in the Right Tray, and close the receptacle.
The alarm is cleared when shifting of stack is performed normally.
3. Press the [Status Monitor/Cancel] key, and check that the status of the Cassette 3 is "paper
present".

09-0013

-

Drum memory detection error

A. Operation / B. Cause /

C. Remedy

Cause: The memory of the Drum Unit could not be detected.

10-0001

-

Toner Low (Black) alarm

A. Operation / B. Cause /

C. Remedy

Low toner was detected and UGW generated an alarm.
* Not displayed on service mode history due to the alarm being generated by UGW

10-0020

-

Toner cartridge prior delivery alarm

A. Operation / B. Cause /

C. Remedy

An alarm for requesting a prior delivery is sent to UGW as the value of Toner level detect value
has reached the value set in COPIER > OPTION > FNC-SW > T-DLV-BK.

10-0094

-

Toner memory detection alarm (Bk)

A. Operation / B. Cause /

C. Remedy

Cause: Memory of toner could not be detected.

10-0100

-

Toner cartridge replace notice

A. Operation / B. Cause /

C. Remedy

The replacement of the Toner Cartridge was detected.

10-0404

-

Toner Bottle empty alarm

A. Operation / B. Cause /

C. Remedy

When the Toner Bottle empty was detected

11-0001

-

Waste Toner Container full

A. Operation / B. Cause /

C. Remedy

Movement: A message "The waste toner container is full." is displayed on the Control Panel, and
the machine is stopped.
Cause: The Waste Toner Container becomes full.
Measures: Clean the Waste Toner Container.

11-0010

-

Waste toner container near full

A. Operation / B. Cause /

C. Remedy

Movement: Displayed a message by an operation panel (A continuation print is possible)
Cause: The capacity of the Waste Toner Container became near full.

7. Error/Jam/Alarm

524

Содержание imagerunner advance 4525i







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды