Canon imageRUNNER 5070, Справочное руководство

Страница: 318 / 600

Department ID Management 7-10
7
Sy
st
em
M
ana
ger
Set
ti
ngs
IMPORTANT
•
If the optional Card Reader-C1 is attached, and SDL or Default Authentication is set as
the login service, Department ID Management is automatically activated. (See "Card
Reader-C1," on p. 3-20.)
•
If SDL or SSO is set as the login service, Department ID Management is performed on
the Department ID that shares the same user name and password as the one registered
for MEAP User Authentication.
•
If SDL or SSO is set as the login service, the Limit Functions mode will not be available.
•
The information registered for SDL, or the Local Device Authentication system of SSO,
and the registered Department ID and password set on this machine and a remote copy
printer must match. If the registered Department ID and password have been changed
because information was updated or changed by the Device Information Delivery
Settings mode, make sure that you change/update the information registered for SDL or
the Local Device Authentication system of SSO accordingly. For instructions on setting
SDL user information, see
the MEAP SMS Administrator Guide .
•
Optional NetSpot Accountant software is necessary to use the Domain Authentication
system of SSO (including when performing domain authentication with the Domain
Authenti Local Device Authentication system) and Department ID Management
simultaneously. If NetSpot Accountant is not installed, and SSO is set as the login
service, make sure that Department ID Management is set to 'Off'. Otherwise, you will
not be able to log on.
•
If you are using the Domain Authentication system of SSO and set Department ID
Management to 'On', you may not be able to log on. In this case, change the login service
to Default Authentication, and then set Department ID Management to 'Off'. For
instructions on setting a login service, see Chapter 4, "MEAP System Management," in
the
MEAP SMS Administrator Guide .
NOTE
•
The maximum number of digits that you can store for the Department ID and password is
seven. If you enter fewer than seven digits for either setting, the machine stores them
with leading zeros.
- Example: If <321> is entered, <0000321> is stored.
•
You can set the page limit from 0 to 999,999 pages.
•
The default setting is 'Off'.