Canon imageRUNNER 5070, Справочное руководство

Страница: 212 / 600

Specifying Common Settings 4-44
4
Cust
om
iz
in
g
Set
ti
ng
s -
C
o
m
m
on
Set
ti
ng
s
Energy Saver Mode
If you press (Energy Saver) on the control panel, the machine goes into the
Energy Saver mode. While in the Energy Saver mode, the temperature of the fixing
unit is lowered, which enables you to conserve electricity.
You can set the energy saving level to -10%, -25%, -50%, or None.
Follow the procedure below to set the Energy Saver mode.
NOTE
•
After deactivating the Energy Saver mode, the machine's recovery time may vary,
depending on the energy saving level setting and the surrounding environment (i.e.,
temperature, humidity, etc.).
•
The default setting is '-10%'.
1
Press (Additional Functions)
➞
[Common Settings].
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-24.
2
Press [
▼
] or [
▲
] until [Energy Saver Mode] appears
➞
press
[Energy Saver Mode].
Energy Saving Level Recovery Time
-10% Approximately 4 seconds
-25% Approximately 6 seconds
-50% Approximately 8 seconds
None 0 seconds