Canon imagePROGRAF iPF810, Руководство пользователя, Страница: 697 / 710

Other Messages
Other Messages
GARO Wxxxx (x represents a number)
Cause Corrective Action
Try printing again, using the correct printer driver. There is a problem with the print job.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired
printing results.
ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the
printer, and contact your Canon dealer for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or
number)
Cause Corrective Action
The last portion of roll paper was used during a
print job. The paper was not advanced because the
trailing edge is taped to the roll. Turn off the printer and remove the roll from the
printer before restoring power.
Fastening tape or the Belt Stopper has not been
removed inside the Top Cover. Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
An error requiring service may have occurred. Turn off the printer and wait at least three seconds
before restoring the power.
If the message is displayed again, write down the
error code and message, turn off the printer, and
contact your Canon dealer for assistance.
Top cover is open.
Cause Corrective Action
Open the Top Cover fully, remove any foreign objects,
and close the Top Cover again. The printer has detected that the Top Cover is open.
If the error occurs again, close the Top Cover, turn off
the printer, and wait a while before restoring power.
Error Message 683