Canon imagePROGRAF iPF810, Руководство пользователя, Страница: 683 / 710

Messages regarding paper
Rel lever is in wrong position.
Cause Corrective Action
Lower the Release Lever. The Release Lever is up.
If the error occurs again, turn off the printer and wait
a while before restoring power.
Rewinding error.
Cause Corrective Action
There is some foreign object near the Media Take-up
Unit sensor and the roll cannot be detected. Remove the foreign object near the sensor.
The Media Take-up Unit sensor is soiled and the roll
cannot be detected. Wipe the sensor with a dry cloth to clean it.
The roll is out of range of detection by the Media
Take-up Unit sensor. Reload the roll.
(→P.139)
The Media Take-up Unit sensor is damaged. Contact your Canon dealer for assistance.
A paper jam has occurred and the roll cannot be
rewound. Remove the paper from the Media Take-up Unit.
Press the
Online button to clear the error.
*Printing will stop momentarily if an error involving the Media Take-up Unit occurs. If you prefer printing not
to stop, set Skip Take-Up Err to On .
Media take-up unit ready.
Cause Corrective Action
Press the Stop button and stop printing.
The mode switches from take-up mode to regular
mode after you change the
Take-up Reel setting in
the MAIN MENU from Enable to Disable and lift the
Release Lever, or after you execute Paper Cutting .
The Take-up Reel setting in the printer MAIN MENU
was changed from Enable to Disable , but a print job
was received before the roll was removed.
Press the Online button to resume printing.
Turn on the media take-up unit.
Cause Corrective Action
The Media Take-up Unit was off when you selected
Enable for Take-up Reel .
Turn the Media Take-up Unit on.
Error Message 669