Canon imagePROGRAF iPF810, Руководство пользователя, Страница: 679 / 710

Messages regarding paper
The roll is empty.
Lift the release lever and replace the roll.
Cause Corrective Action
The roll is empty. Follow these steps to replace the used roll with a new
roll of the same type and size.
1.
Lift the Release Lever and remove the roll.
(→P.143)
(→P.145)
2.
Load the new roll.
(→P.136)
(→P.139)
3.
If no barcode was printed on the roll, specify the
type of paper.
(→P.134)
4.
If no barcode was printed on the roll, specify the
paper length.
(→P.135)
5.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
There is remaining roll paper, but because it could
not be advanced, it could not be detected. Choose a higher level of Print Quality in the
Advanced Settings of the printer driver.
(→P.222)
Press OK.
Cause Corrective Action
The roll is empty. Follow these steps to replace the used roll with a new
roll of the same type and size.
1.
Press the OK button and remove the roll.
(→P.143)
(→P.145)
2.
Load the new roll.
(→P.136)
(→P.139)
3.
If no barcode was printed on the roll, specify the
type of paper.
(→P.134)
4.
If no barcode was printed on the roll, specify the
paper length.
(→P.135)
5.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Error Message 665