manualshive.com logo in svg

Canon imagePRESS C800 Series, Руководство по эксплуатации

Поделиться
Скачать
Canon imagePRESS C800 Series Скачать руководство пользователя страница 11

Notes for the reader

Introduction

This manual helps you to use the imagePRESS C800 Series. The manual contains a description of
the product and guidelines to use and operate the imagePRESS C800 Series.

Definition

Attention-Getters

Parts of this manual require your special attention. These parts can provide the following:
• Additional general information, for example, information that is useful when you perform a

task.

• Information to prevent personal injuries or property damage.

Symbols used in this manual

The following symbols are used in this manual to explain procedures, restrictions, handling
precautions, and instructions that should be observed for safety.

Overview of the attention-getters

Word

Icon

Indicates

WARNING

Indicates a warning concerning operations that may
lead to death or injury to persons if not performed
correctly. To use the machine safely, always pay at-
tention to these warnings.

CAUTION

Indicates a caution concerning operations that may
lead to injury to persons if not performed correctly.
To use the machine safely, always pay attention to
these cautions.

IMPORTANT

Indicates operational requirements and restrictions.
Be sure to read these items carefully to operate the
machine correctly and to avoid damaging the ma-
chine or property.

NOTE

Indicates a clarification of an operation or contains
additional explanations for a procedure. Reading
these notes is highly recommended.

-

Indicates an operation that must not be performed.
Read these items carefully and make sure not to
perform the described operations.

Notes for the reader

Chapter 1 - Preface

11

imagePRESS C800 Series

Содержание imagePRESS C800 Series




























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды