CHAPTER 3 DISASSEMBLY & REASSEMBLY
7. Drive Roller
8. Feed Roller Cover
Note:
The rollers on the registration side and
the eject side are the same
components, and have the same
disassembly procedure. The following
shows the rollers on the registration
side.
1) Remove the lower feed guide plate.
2) Open the feed roller cover
{
1
, unhook
the 2 pairs of fitting parts
{
2
using a tool,
and then remove from the base.
1) Remove the lower feed guide plate.
2) Unhook the leading edge fitting part, then
remove the pulley/gear
{
1
. Detach the
stopper
{
2
, slide the left and right
bearings
{
3
, and remove the driver roller
{
4
.
Note:
The left and right bearings are
different sizes.
Figure 3-311
Figure 3-310
Notes on assembling
The pulley/gear and bearings should be
mounted to match the shapes of the
holes.
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M160 FIRST EDITION
3-13