164
Problem 20 Multifeeding when scanning multiple bound pages.
Solutions
Place the bound edge against the feed inlet and scan by
manual feeding.
Problem 21 Barcode detection fails.
Solutions
Barcode detection may fail depending on the brightness
of the image. Adjust the [Brightness] setting on the
[Brightness] tab sheet of the scanner driver's setting
screen. Alternatively, enable [Prevent Bleed Through /
Remove Background] on the [Image control] tab sheet.
Alternatively, increase the [Dots per inch] setting on the
[Basic] tab sheet.
Problem 22 Ejected documents are misaligned.
Solutions
(1) Raise the Document Eject Stopper to stop ejected
documents from spilling.
(2) Lengthening the paper feed interval can make it
easier to keep ejected documents aligned. Open the
scanner driver's settings screen, and on the
[Feeding] tab sheet, click the [Advanced setting]
button and increase the [Feed interval setting].
To set from User Mode, increase the [Feed Interval].
"User Mode Operations" (See p. 61)
(3) Depending on document thickness and condition,
extra time may be needed for documents to fall into
the eject tray, causing them to be pushed out by
subsequent ejected documents. In this case, open
the scanner driver's settings screen and on the
[Feeding] tab sheet, select [Extra-thin paper] for the
[Document type].
To set from User Mode, set [Separation Force] to
[Thin Paper Mode].
