Canon imageFORMULA DR-2050C, Руководство пользователя

Страница: 12 / 94

8
Before Using the Scanner
Remote Control (DR-2050SP only)
• Do not leave the remote control on the floor, as damage may result if it is
stepped on.
• Do not disassemble the remote control.
• Take care not to misplace the remote control.
• Do not drop or cause physical shock to the remote control.
• Do not use any remote control other than the one provided with the scanner.
Also, do not use the remote control with any other product.
• Remove the batteries from the remote control when it is not in use for
extended periods of time.
• When replacing the remote control batteries, replace both batteries together.
• Insert the positive (+) and negative (-) poles of the batteries correctly.
• Do not combine old and new batteries, or batteries of different types.
• Do not use Ni-Cd or Ni-MH batteries.
• Make sure to comply with local regulations when disposing of batteries used
for the remote control.
Handling
WARNING
Note the following precautions whenever using the scanner.
Failure to do so may result in a fire or electric shock.
• Never use alcohol, benzene, paint thinner, aerosol sprays, or
any other highly flammable substance near the scanner.
• Do not cut, damage, or modify the power cord or AC adapter. Do
not place heavy objects on the power cord or AC adapter, and do
not pull or excessively bend the power cord.
• Never connect the power cord when your hands are wet.
• Do not connect the scanner to a multi plug power strip.
• Do not knot or coil the power cord as this may result in a fire or
electric shock. When connecting the power cord, make sure that
the power plug is securely and completely inserted into the
power outlet.
• Do not use power cords and AC adapters other than the power
cord and AC adapter provided with this scanner.
• Never try to take the scanner apart or modify it in any way.
• Never try to take the AC adapter apart or modify it in any way, as
this is dangerous and may lead to a fire or electric shock.
• Do not use flammable aerosol sprays products near the scanner.
• When cleaning the scanner, turn the power switch OFF and
disconnect the power cord from the power supply.
• Clean the scanner using a slightly dampened cloth which has
been well wrung out. Never use alcohol, benzene, paint thinner,
or any other flammable substances.