8
Important Safety Instructions
To ensure the safe operation of this flatbed, make sure to read the
safety warnings and precautions described below.
Installation Location
The performance of this flatbed is affected by the environment in
which it is installed. Make sure that the location where the flatbed is
installed meets the following environmental requirements.
●
Provide adequate space around the flatbed for operation,
maintenance, and ventilation.
●
Avoid installing the flatbed in direct sunlight. If this is unavoidable,
use curtains to shade the flatbed.
●
Avoid locations with excessive dust. Dust can have negative effects
on the inner parts of the flatbed.
●
Avoid warm or humid locations, such as in the vicinity of a water
faucet, water heater, or humidifier. Avoid locations where ammonia
gas is emitted. Avoid locations near volatile or flammable
chemicals, such as alcohol or paint thinner.
●
Avoid locations that are subject to vibration.
●
Avoid exposing the flatbed to rapid changes in temperature. If the
room in which the flatbed is installed is cold but rapidly heated,
water droplets (condensation) may form inside the flatbed. This
may result in a noticeable degradation in scanning quality. The
following conditions are recommended for optimal scanning quality:
Room temperature: 50°F to 90.5°F (10°C to 32.5°C)
Humidity: 20% to 80% RH
●
Avoid installing the flatbed near equipment that generates a
magnetic field (e.g., speakers, televisions, or radios.)
AC Adapter
●
Connect the AC adapter only to a power outlet of the rated voltage
and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz
depending on your region).
●
Do not connect other electrical equipment to the same power outlet
to which the flatbed is connected. Also, if you use an extension
cord, make sure that the extension cord is rated for the current
requirements of the flatbed.
●
Never disassemble or modify the AC adapter, as this is dangerous.
●
The power cord may become damaged if it is often stepped on or if
heavy objects are placed on it. Continued use of a damaged power
cord and AC adapter may lead to an accident, such as a fire or
electrical shock.
●
Do not use the power cord while it is coiled.
●
Do not pull directly on the power cord. When disconnecting the
power cord, grasp the power plug and remove it from the power
outlet.
●
Keep the area around the power cord clear of objects so that the
power cord can be disconnected easily in an emergency.
●
Do not use an AC adapter other than the one provided with the
flatbed. Do not use the AC adapter provided with the flatbed with
other products.
●
If you have any questions regarding the power supply, contact your
local authorized Canon dealer or service representative for further
information.
3.9"
(100 mm)
3.9"
(100 mm)
3.9" (100 mm)
