Canon imageCLASS X MF1127C, Начало работы

Страница: 17 / 37

18
En
Appendix
•
Use only a power supply that meets the specifi ed
voltage requirements. Failure to do so may result in
a fi re or electrical shock.
• The machine must be connected to a socket outlet
with grounding connection by the provided power
cord.
•
Do not use power cords other than the one
provided, as this may result in a fire or electrical
shock.
• The provided power cord is intended for use with
this machine. Do not connect the power cord to
other devices.
•
Do not modify, pull, forcibly bend, or perform any
other act that may damage the power cord. Do not
place heavy objects on the power cord. Damaging
the power cord may result in a fie or electrical shock
•
Do not plug in or unplug the power plug with wet
hands, as this may result in an electrical shock.
•
Do not use extension cords or multi-plug power
strips with the machine. Doing so may result in a fire
or electrical shock.
• Do not wrap the power cord or tie it in a knot, as this
may result in a fi re or electrical shock.
•
Insert the power plug completely into the AC power
outlet. Failure to do so may result in a fire or
electrical shock.
• Remove the power plug completely from the AC
power outlet during a thunder storm. Failure to do
so may result in a fi re, electrical shock, or damage to
the machine.
• Make sure that the power supply for the machine is
safe, and has a steady voltage.
• Keep the power cord away from a heat source;
failure to do this may cause the power cord coating
to melt, resulting in a fi re or electrical shock.
Avoid the following situations:
If excessive stress is applied to the connection part of
the power cord, it may damage the power cord or the
wires inside the machine may disconnect. This could
result in a fi re.
• Connecting and disconnecting the power cord
frequently.
• Tripping over the power cord.
•
The power cord is bent near the connection
part, and continuous stress is being applied to
the power outlet or the connection part.
•
Applying excessive force on the power plug.
IMPORTANT
Do not install in the following locations
Doing so may result in damage to the machine.
• A location subject to temperature and
humidity extremes, whether low or high
• A location subject to dramatic changes in
temperature or humidity
• A location near equipment that generates
magnetic or electromagnetic waves
• A laboratory or location where chemical
reactions occur
• A location exposed to corrosive or toxic gases
• A location that may warp from the weight of
the machine or where the machine is liable to
sink (a carpet, etc.)
Important Safety
Instructions
This chapter describes important safety
instructions for the prevention of injury to users of
this machine and others, and damage to property.
Read this chapter before using the machine, and
follow the instructions to use the machine properly.
Do not perform any operations not described in
this manual. Canon will not be responsible for any
damages resulting from operations not described
in this manual, improper use, or repair or changes
not performed by Canon or a third party
authorized by Canon. Improper operation or use of
this machine could result in personal injury and/or
damage requiring extensive repair that may not be
covered under your Limited Warranty.
WARNING
Indicates a warning concerning operations
that may lead to death or injury to persons if
not performed correctly. To use the machine
safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations
that may lead to injury to persons if not
performed correctly. To use the machine
safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and
restrictions. Be sure to read these items
carefully to operate the machine correctly, and
avoid damage to the machine or property.
Installation
To use this machine safely and comfortably,
carefully read the following precautions and
install the machine in an appropriate location.
WARNING
Do not install in a location that may result in a
fi
re or electrical shock
•
A location where the ventilation slots are
blocked (too close to walls, beds, sofas, rugs, or
similar objects)
•
A damp or dusty location
•
A location exposed to direct sunlight or outdoors
•
A location subject to high temperatures
•
A location exposed to open fl ames
•
Near alcohol, paint thinners or other
fl ammable substances
Other warnings
• Do not connect unapproved cables to this
machine. Doing so may result in a fi re or
electrical shock.
• Do not place necklaces and other metal
objects or containers fi lled with liquid on the
machine. If foreign substances come in contact
with electrical parts inside the machine, it may
result in a fi re or electrical shock.
• If any foreign substance falls into this machine,
unplug the power plug from the AC power outlet
and contact your local authorized Canon dealer.
CAUTION
Do not install in the following locations
The machine may drop or fall, resulting in injury.
• An unstable location
• A location exposed to vibrations
WARNING
Avoid poorly ventilated locations
This machine generates a slight amount of ozone
and other emissions during normal use. These
emissions are not harmful to health. However,
they may be noticeable during extended use or
long production runs in poorly ventilated rooms.
To maintain a comfortable working environment,
it is recommended that the room where the
machine operates be appropriately ventilated.
Also avoid locations where people would be
exposed to emissions from the machine.
Do not install in a location where
condensation occurs
Water droplets (condensation) may form inside
the machine when the room where the machine
is installed is heated rapidly, and when the
machine is moved from a cool or dry location to
a hot or humid location. Using the machine
under these conditions may result in paper jams,
poor print quality, or damage to the machine. Let
the machine adjust to the ambient temperature
and humidity for at least 2 hours before use.
Avoid installing the machine near computers
Electrical interference and vibrations generated by
the machine while printing can adversely
affect
the operation of such equipment.
Avoid installing the machine near televisions,
radios, or similar electronic equipment.
The machine might interfere with sound and
picture signal reception.
Insert the power plug into a dedicated power
outlet, and maintain as much space as possible
between the machine and other electronic
equipment.
In altitudes of above sea level 3,000 m or higher
Machines wit
•
h a hard disk may not operate
properly when used at high altitudes of about
3,000 meters above sea level, or higher.
Connecting the Telephone Line
This machine conforms to a analog telephone
line standard. The machine can be connected to
the public switched telephone network (PSTN)
only. If you connect the machine to a digital
telephone line or a dedicated telephone line, it
might impede proper operation of the machine
and could be the cause of damage. Make sure to
confi rm a type of telephone line before
connecting the machine. Contact your optical
fi ber line or IP telephone line service providers if
you want to connect the machine to those
telephone lines.
When using wireless LAN
•
Install the machine at a distance of 50 meters
or less from the wireless LAN router.
•
As far as possible, install in a location where
communication is not blocked by
intervening objects. The signal may be
degraded when passing through walls or
floors.
•
Keep the machine as far as possible from digital
cordless phones, microwave ovens, or other
equipment that emits radio waves.
•
Do not use near medical equipment. Radio
waves emitted from this machine may interfere
with medical equipment, which may result in
malfunctions and accidents.
If the operating noise concerns you Depending on the
use environment and operating mode, if the
operating noise is of concern, it is recommended that
the machine be installed in a place other than the
office.
Moving the Machine
If you intend to move the machine, even to a location
on the same fl oor of your building, contact your local
authorized Canon dealer beforehand. Do not attempt
to move the machine yourself.
Power Supply