Canon imageCLASS X MF1127C, Начало работы

Страница: 21 / 37

2 2
En
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if
you communicate overseas
[NOTE]
Canon recommends an individual line
following industry standards, i.e., 2,500
(touch-tone) or 500 (rotary/pulse dial)
telephones. A dedicated extension off a PBX
(Private Branch eXchange) unit without “Call
Waiting” can be used with your facsimile unit.
Key telephone systems are not recommended
because they send nonstandard signals to
individual telephones for ringing and special
codes, which may cause a facsimile error.
Appendix
Rights of the Telephone Company
If this equipment (imageCLASS X MF1127
C
)
causes harm to the telephone network, the
telephone company may temporarily
disconnect service.
The telephone company
also retains the right to make changes
affect
facilities and services that may
affect
the
operation of this equipment. When such
changes are necessary, the telephone company
is required to give adequate prior notice to the
user. However, if advance notice is not possible,
the telephone company will notify the
customer as soon as possible. Also, the
customer will be advised of his/her right to fi le a
complaint with the FCC if he/she believes it is
necessary.
WAR
NING
The t
elephone Consumer Protection Act of
1991 makes it unlawful for any person to use a
computer or other electronic device, including
FAX machines, to send any message unless
such message clearly contains in a margin at
the top or bottom of each transmitted page or
on the fi rst page of the transmission, the date
and time it is sent and an identifi cation of the
business or other entity, or other individual
sending the message and the telephone
number of the sending machine or such
business, other entity, or individual. (The
telephone number provided may not be a 900
number or any other number for which charges
exceed local or long distance transmission
charges.)
[NOTE]
In order to program this information into your
machine, you should complete the procedure
for registering your name, unit's telephone
number, time, and date as described in Setting
Up or Basic Operations in the User's Guide.
Users in Canada
Pre-Installation Requirements for Canon
Facsimile Equipment
A. Location
Supply a suitable table, cabinet, or desk for
the machine. See the User’s Guide for specific
dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or
rotary) should be used.
2. Order a CA11A modular jack, which should
be installed by the telephone company. If the
CA11A jack is not present, installation cannot
occur.
3. Order a normal business line from your
telephone company’s business
representative. The line should be a regular
voice grade line or an equivalent one. Use one
line per unit.
• The REN of this product is 1.0.
• Before installing this equipment, users should
ensure that it is permissible to be connected to the
facilities of the local telecommunications company.
The equipment must also be installed using an
acceptable method of connection. In some cases,
the company’s inside wiring associated with a
single line individual service may be extended by
means of a certifi ed connector assembly (telephone
extension cord). The customer should be aware
that compliance with the above conditions may
not prevent deterioration of service in some
situations.
• Repairs to certifi ed equipment should be made by
an authorized Canadian maintenance facility
designated by the supplier. Any repairs or
alterations made by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to request the
user to disconnect the equipment.
• Users should ensure for their own protection that
the electrical ground connections of the power
utility, telephone lines, and internal metallic water
pipe system, if present, are connected together.
This precaution may be
particularly important in
rural areas.
Users should not attempt to make such
connections themselves, but should contact the
appropriate electric inspection authority, or
electrician, as appropriate.
[NOTE]
This equipment complies with the Canadian
ICES-003 Class B limits.
English
This product meets the applicable
Innovation, Science and Economic Development
Canada technical specifi cations.
The Ringer Equivalence Number (REN) indicates the
maximum number of devices allowed to be
connected to a telephone interface. The
termination of an interface may consist of any
combination of devices subject only to the
requirement that the sum of the RENs of all the
devices not exceed five.
About This Manual
Trademarks
QR Code is a trademark of DENSO WAVE
INCORPORATED.
All brand names and product names appearing on
this manual are registered trademarks or trademarks
of their respective owners.
Third Party Software
This Canon product (the “PRODUCT”) includes
third-party software modules. Use and distribution
of these software modules, including any updates
of such software modules (collectively,the
“SOFTWARE”) are subject to license conditions
below.
(1) You agree that you will comply with any
applicable export control laws, restrictions or
regulations of the countries involved in the
event that the PRODUCT including the
SOFTWARE is shipped, transferred or
exported into any country.
(2) Rights holders of the SOFTWARE retain in all
respects the title, ownership and intellectual
property rights in and to the SOFTWARE.
Except as expressly provided herein, no
license or right, expressed or implied, is
hereby conveyed or granted by rights holders
of the SOFTWARE to you for any intellectual
property of rights holders of the SOFTWARE.
(3) You may use the SOFTWARE solely for use
with the PRODUCT.
(4) You may not assign, sublicense, market,
distribute, or transfer the SOFTWARE to any
third party without prior written consent of
rights holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you may
transfer the SOFTWARE only when (a) you
assign to a transferee all of your rights to the
PRODUCT and all rights and obligations
under the conditions governing the
SOFTWARE and PRODUCT and (b) such
transferee agrees in writing to be bound by
all these conditions.
(6) You may not decrypt, decompile, reverse
engineer, disassemble or otherwise reduce
the code of the SOFTWARE to human
readable form.
(7) You may not modify, adapt, translate, rent,
lease or loan the SOFTWARE or create
derivative works based on the SOFTWARE.
(8) You are not entitled to remove or make
separate copies of the SOFTWARE from the
PRODUCT.
(9) The human-readable portion (the source
code) of the SOFTWARE is not licensed to
you.
Notwithstanding (1) through (9) above, the
PRODUCT includes third-party software modules
accompanying the other license conditions, and
these software modules are subject to the other
license conditions.Please refer to the other
license conditions of third-party software
modules described in Appendix of Manual for
the corresponding the PRODUCT. This Manual is
available at
https://oip.manual.canon/ .
By using the PRODUCT, you shall be deemed to
have agreed to all applicable license conditions..
If you do not agree to these license conditions,
please contact your service representative.
ACCEPTANCE
THE TERMS OF THIS THIRD PARTY SOFTWARE
STATED HERE OR IN RELATED WARRANTY
PROVISIONS SHALL BE DEEMED ACCEPTED UPON
YOUR USE OF THE PRODUCT FOR ONE OR MORE
OF ITS NORMAL PURPOSES, IF THERE HAS BEEN
NO OTHER PRIOR EXPRESS ACCEPTANCE..
THE TERMS OF THIS THIRD PARTY SOFTWARE
GOVERN THE THIRD PARTY SOFTWARE AS
DELIVERED WITH THE PRODUCT AND ALL
UPDATED VERSIONS OF THE THIRD PARTY
SOFTWARE PROVIDED UNDER MAINTENANCE
AGREEMENTS OR OTHER SERVICE
ARRANGEMENTS FOR THE PRODUCT WITH
CANON USA OR CANON CANADA OR THEIR
RESPECTIVE AUTHORIZED SERVICE
ORGANIZATIONS.
C. Power Requirements
The power outlet should be a three-prong grounded
receptacle (Single or Duplex). It should be
independent from copiers, heaters, air conditioners,
or any electric equipment that is thermostatically
controlled. The rated value is 115 volts and 15
amperes. The CA11A modular jack should be
relatively close to the power outlet to facilitate
installation.]
[Notice
CAUTION