12
2 Set Up the Machine
Load Paper
This section describes the procedures for making paper and paper size settings in the “Setup Guide.” Animated
screens are included with each step described in the “Setup Guide.”
1
Make sure the following screen is displayed on
the display, then press [
OK
] to proceed to the
“Setup Guide.”
2
Pull out the paper drawer until it stops.
3
Hold the paper drawer with both hands and
remove it from the machine.
Make sure to take the paper drawer out of the machine
before loading paper. If paper is loaded while the paper
drawer is partially pulled out, the paper drawer may fall,
resulting in damage to the machine or personal injury.
4
Press [
OK
] to proceed to the “Setup Guide.”
5
Hold the lock release lever of the side paper
guides (A) and slide the guides to the mark for
the size of the paper to be loaded. The side
paper guides move together.
Make sure to set the guides to the mark for the size of the
paper to be loaded correctly. If the guides are positioned
incorrectly, it may cause paper jams, dirty prints, etc.
6
Press [
OK
] to proceed to the “Setup Guide.”
7
Hold the lock release lever of the rear paper
guides (A) and slide the guides to the mark for
the size of the paper to be loaded.
Make sure to set the guides to the mark for the size of the
paper to be loaded correctly. If the guides are positioned
incorrectly, it may cause paper jams, dirty prints, etc.
