Canon imageCLASS MF5600 Series, Руководство по обслуживанию

Страница: 102 / 256

Chapter 3
3-46
3.1.20.12
Removing the
Operation Panel Unit
0006-3770
1) Remove the two screws [1].
2) Disengage the claw [3] on the rear right side of the
operation panel unit [2] and lift it up. After
removing the two flat cables, remove the operation
panel unit.
F-3-198
3.1.20.13
Removing the
Scanner Cover Unit
0006-3771
1) Remove the platen glass cover.
2) Remove the three screws [1].
3) Disengage the front claw [2] and the three claws on
the sides [3]. Lift up the scanner cover unit [4] a
little to disengage the other two claws [5]. Then
remove the scanner cover unit.
F-3-199
3.1.20.14
Removing the
Speaker
0006-3767
1) Disengage the speaker cable [1] from the cable
guide.
F-3-200
2) Remove the two screws [1] of the speaker cover [2]
from the lower side of the scanner unit.
Although the scanner unit is turned over in the
illustration, you should not turn over it when you
perform this operation because the CCD unit might
fall down.
F-3-201
3) Remove the speaker cover and the speaker from the
lower side of the scanner unit.
[1]
[2]
[3]
[3]
[5]
[4]
[3]
[1]
[1]
[2]
[1]
[1]
[2]