Canon imageCLASS MF5600 Series, Руководство по обслуживанию

Страница: 159 / 256

Chapter 3
3-103
3.6.2.8
Removing the NCU
Board
0006-3739
1) Remove the two connectors [1] and the flat cable
[2].
2) Remove the two screws [3] and remove the NCU
board [4].
F-3-445
3.6.2.9 Removing the NCU
Case
0006-3732
1) Remove the three screws [1]; then, pull the upper
portion of the NCU case [2] toward you, and lifting
it upward, remove the NUC case.
F-3-446
3.6.2.10
Removing the Scanner
Unit
0006-3734
1) Remove the screw [1] and remove the connector [2]
as well as the flat cable [3] on the DCNT board.
Remove the tape holding the cable in advance.
Prepare a new tape (Part No: AZ7-0008) of a suitable
length before you attach the cable again.
F-3-447
2) Remove the two front screws [1].
F-3-448
[1] [2]
[4]
[3]
[1]
[2]
[2] [1]
[3]
[1]