7
Setting Up the S
end F
ea
tur
e
Setting Up the Send Feature
This section describes the settings you need to make before using the Send feature on this machine.
Setting Up the Scan to E-Mail Feature
You need to make various settings to use the Scan to E-Mail feature. Use the flow chart below to
understand the setup procedure.
Checking the Information Required for the Scan to E-Mail Feature (
→
P. 9)
You check the information required for the Scan to E-mail feature.
Connecting a Network Cable (
→
P. )
You connect the machine to the network environment.
Setting the IP Address (
→
P. 4)
You make sure the correct IP address is set.
Starting the Remote UI (
→
P. 6)
Using the Remote UI, you set up the machine.
Setting up and Using the Scan to E-Mail Feature (
→
P. 8)
You set up and test the Scan to E-mail feature.
The setup is completed.
The Remote UI allows you to remotely make various settings of the machine using a web browser software such
as Microsoft Internet Explore. Using the Remote UI, you can make settings more easily and quickly than using the
operation panel on this machine.
