Canon ImageCLASS 2300, Руководство принтера

Страница: 82 / 134

Problems and Solutions Without Messages 4-5
Tr
oub
leshooting
4
Cause 3 The printer could not receive the data from the host computer because the
printer took too long to process the current data in the printer.
Remedy You may have to increase the I/O TIMEOUT setting or disable it in the
ETHERNET MENU, PARALLEL MENU, or USB MENU, (See "I/O TIMEOUT,"
on p. 3-29, p. 3-31, or p. 3-34.)
Cause 4 The printer and host computer are not properly connected.
Remedy Check the cable connection at the host computer and printer. (See "Connecting
to a Computer," on p. 1-6.)
Cause 5 A failure occurred in the printer.
Remedy Take appropriate measures according to the message on the display. (See
"Responding to Error Messages," on p. 4-8.)
Cause 6 The paper size set in the drawer is different from the paper size you have set up
in the application software. Or an appropriate paper size you have set for
enlarging or reducing the copy is not set.
Remedy Change the paper in the selected drawer to the paper size you have set in the
application software (or enlarging/reducing copy). Then print it again.
Remedy Choose the drawer with the appropriate paper size you have set up in the
application software (or enlarging/reducing copy). Then print it again.
Cause 7 Paper in the drawer or the stack bypass has run out.
Remedy Set more paper. After setting, press [OK] if the machine is not online.
Printing stops.
Cause Printing stops midway during a job and the printer will not print the remaining
pages. The flow of data from the host computer has been interrupted for some
reason and this has caused a timeout. If no data is received for a specified
length of time, the job is terminated.
Remedy You may have to increase the I/O TIMEOUT setting or disable it in the
PARALLEL MENU, ETHERNET MENU, or USB MENU. (See "I/O TIMEOUT,"
on p. 3-29, p. 3-31, or p. 3-34.)
Paper excessively curled after coming out of the printer.
Cause You may be using paper that curls too easily.
Remedy Ensure the paper you are using meets the specifications described in Chapter
2, "Basic Operations," in the
Reference Guide . Remove the paper stack, turn it
over, reload in the drawer and try again.