Canon i-SENSYS MF211 Series, Руководство по обслуживанию

Страница: 293 / 308

8
8
8-20
8-20
Service Mode > TESTMODE > SCAN > SENSOR
Service Mode > TESTMODE > SCAN > SENSOR
TESTMODE
SYSTEM
■ DRAM
TESTMODE > SYSTEM > DRAM
Sub item Description Common to
all models
TEST1 Data read/write check for DRAM (except system work area) Yes
■
SPEAKER
TESTMODE > SYSTEM > SPEAKER
Sub item Description FAX
model
Other
model
ON When "ON" is selected, entry tone is generated once. Yes No
MIN When "MIN" is selected, entry tone is generated once. Yes No
MAX When "MAX" is selected, entry tone is generated once. Yes No
T-8-48
T-8-49
SCAN
■ ADJUST
● ADF-ADJ
TESTMODE > SCAN > ADJUST > ADF-ADJ
Sub item Description ADF
model
Other
model
DF-SPEED Enter the adjustment value for the magnification ratio in
vertical scanning direction in stream feeding
Setting value: -30 ~ 30(Default value: 0)
Yes No
DF-OFFSET Enter for the adjustment of DF original stop position
Setting value: -30 ~ 30(Default value: 0)
Yes No
■ SENSOR
TESTMODE > SCAN > ADJUST > SENSOR
Sub item Description Common to
all models
TRAY PAPER
SENSOR
Display the status of Multi Pickup Sensor
1: Paper existing 0: No paper
Yes
REGI SENS Display the status of Leading Edge Sensor
1: Paper existing 0: No paper
Yes
ESS DOOR SENS Display the status of Delivery Tray Open/ Close Switch
1: OPEN 0: CLOSE
Yes
T-8-50
T-8-51