Canon HD XS HJ14ex4.3B, Руководство по эксплуатации

Страница: 39 / 110

E7
1
Set the zoom operation change-over knob at the bottom of
the lens drive unit to MANU. position.
2
Turn the z oom ring (or z oom lever) to perform z oom operation.
NOTE
The zoom operation change-over knob must be set to the
“MANU.” position before performing manual zoom operations.
The lens may be damaged if manual zoom operations are
forcibly performed with the knob at the “SERVO” position.
5-1-2. Servo Zoom Operation
Zoom operation can be performed by driving the built-in motor in the lens.
5 OPERATION
5-1. ZOOM OPERATION
5-1-1. Manual Zoom Operation
ZOOM FOCUS
REMOTE1 REMOTE2/
VIRTUAL
REMOTE3
MANU. SERVO MANU. SERVO
Zoom Operation Change-over Knob
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ft
m
ڦ
ڦ
ڦ
ڦ
ڦ
1x
2x
Toward Tele end
Toward Wide end
Zoom Lever
Zoom Ring
1
Set the z oom operation change-over knob to SERVO position.
2
Press the z oom rocker seesaw to perform z oom operation.
Zoom speed changes by the depth of the switch being pressed.
The deeper the switch is pressed the faster the
z oom speed.
AM
RET
IRI
S
T
W
࢔࢖ࣜࢫືస࣮ࣔࢻ
HJ18ex7.6B IASE S
MEMO
AUX
18
㹶
Zoom Rocker Seesaw
5-1-3. Maximum Zoom Speed Adjustment
The maximum speed of z oom when the z oom rocker seesaw is pressed can be adjusted with the
adjusting volume.
This adjustment can be performed on the information display. Refer to the Information Display Manual.
Max. Zoom Speed
Adjusting Volume
5 OPERATION