Canon HD XS HJ14ex4.3B, Руководство по эксплуатации

Страница: 42 / 110

E10
2. How to operate the speed preset function
When the “Sped” switch is pressed, the z oom starts to move at the preset speed and to the determined
direction (toward the telephoto angle or the widest angle) stored in section 1 and stops at the z oom end.
3. How to cancel movement in Speed Preset
Movement in Speed Preset can be canceled by any of the following operations.
1
） Press the “ Sped ” switch again. → Zooming stops.
2 ） Performing z oom operation with the z oom rocker seasaw / “ Shtl ” switch / “ Fr1P ” switch / “ Fr2P ” switch /
“ Fr1F ” switch / “ Fr2F ” switch.
5-1-7. Framing Preset
There are three framing preset types based on how the settings are combined.
［ Zoom ］
This enables a predetermined picture angle and movement speed ( z oom speed) to be reproduced easily.
［ Focus ］ “IASE S/IASE-C S” type only
This enables a predetermined focus to be reproduced easily.
［ Z+F ］ “IASE S/IASE-C S” type only
This enables the movement speed (focus speed, z oom speed) to a predetermined focus and picture
angle to be reproduced easily.
Up to two framing presets, Frame1 and Frame2, can be stored in the memory. Only Frame1 is described
in the description given on the following pages. Frame1 is indicated as “Fr1P”.
Focus speed is fixed at maximum speed.
The zoom and focus are controlled in such a way that they start and stop simultaneously.
Control content
Movement speed setting
Frame preset
control
Setting combinations
Zoom
Z+F
Focus
"Fr1P", "Fr2P"
(speed settable)
The zoom moves at the preset speed.
Zoom operation
control
Focus operation
control
Zoom + focus
operation control
The zoom moves at the maximum speed.
The focus moves at maximum speed. The focus moves at maximum speed.
The zoom and focus move at the
maximum speed.
The zoom and focus move at the preset speeds.
(maximum speed)
*1
*2
2 :
1 :
*
*
"Fr1F", "Fr2F"
How to set the z oom speed to the framing memory position
Movement speed to the framing position is selected by assigning the “ Fr1P ” or “ Fr1F ” switch.
“Fr1P”---------- For the preset speed setting （ preset speed ） (Assigned to the AUX switch at the factory.)
“Fr1F”----------For the maximum speed setting （ fast speed ）
For details on how to assign the switches, refer to 5-6. SWITCH OPERATIONS.
Frame1:
ZSpeed: 800
Frame2: Zoom
Preset
Zoom
Framing Preset [Zoom]/[Focus]/[Z+F] Setting
The following fi gure below is shown as an example. Actual state of the switch may look different if the
function is allocated to the different switch.
1
） Fr1P function--------Assigned to the AUX switch by factory default.
The framing preset setting is changed on the Preset screen on the infor-
mation display. The
“ Frame1 ” setting is changed to “ Zoom ” , “ Focus ” , or
“ Z+F ” .
5 OPERATION