1
2
3
4
5
6
7
8
9
Back
Next
Previous
TOP
3-25
Before Using the
Machine
Document and Paper
Sending and
Receiving
Copying
Printing
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Memory Reception
The machine automatically receives faxes in memory when printing
is disabled under certain conditions (e.g., toner or paper has run
out).
Load paper and press [OK] to start printing faxes stored in memory.
For toner empty, the machine automatically starts printing when
the error is cleared.
The machine memory can store up to 346 fax jobs or approximately 346
pages.*
* Based on the condition that the other party sends the fax by FAXPHONE
L90 with ITU-T Standard Chart No.1, standard mode. The maximum
number of pages that the machine’s memory can store differs depending
on the other party’s machine.
Once the pages are printed, they are deleted from the memory.
If the memory becomes full, you will not be able to receive the remaining
pages. Contact the other party and ask them to resend the remaining
pages of the fax.
■
–
–
–
Memory Lock Reception
You can set the machine to store all documents in memory without
automatically printing them.
The default setting is <OFF>.
1.
Press
[Menu].
2.
Press
[
] or [
] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Password has been set, enter the System Password
using the numeric keys, then press [OK].
3.
Press
[
] or [
] to select
<COMMUNICATIONS>, then press [OK].
4.
Press
[
] or [
] to select <MEMORY LOCK>,
then press [OK].
If the memory lock password has already been set, enter the
password, then press [OK].
5.
Press
[
] or [
] to select <ON>, then press
[OK].
When you select <OFF>, the machine starts to print the received
documents in memory.
■