7-4
(Default settings are shown in bold type.)
RX SETTINGS
Name
Description
Settings
ECM RX
FAX/TEL AUTO SW
RING START TIME
F/T RING TIME
DEFAULT ACTION
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
RING TIME
REMOTE RX
REMOTE RX ID
MEMORY RX
DRPD:SELECT FAX
Enable/disable error correction during reception.
Enable/disable FAX/TEL switchover. This feature is used to
answer calls, and if no fax tone is detected, the fax rings to
alert you of an incoming call.
Set the duration that the fax listens for a fax tone before
starting to ring.
Set the length of time the fax will ring to alert you of an
incoming call.
Select the action taken after the F/T RING TIME expires.
When the optional handset or an extension phone is
connected, you can set the fax to ring when it receives a
call.
Set the number of incoming rings before the fax answers.
Determine if the fax switches to document receive mode
after the fax rings for a specified time when the fax is in
the manual receive mode.
Set the amount of time the fax will ring before switching to
document receive mode.
Enables/disables remote receiving.
If you set REMOTE RX to ON, you can select the remote
receiving ID.
Turn on/off memory receiving of a document.
If you select DRPD as the receive mode, select the ring
pattern for the fax.
ON
/OFF
–
8
seconds (0 to 30)
15
seconds (10 to 45)
DISCONNECT/
RECEIVE
ON/
OFF
2
times (1 to 99)
ON/
OFF
15
seconds (1 to 99)
ON
/OFF
25
(00 to 99)
ON
/OFF
NORMAL RING
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
RX REDUCTION
FIXED REDUCTION
REDUCE DIMENSION
PAPER SIZE
Enable/disable reduction for received documents.
Select the reduction rate.
Select reduction in height only or both width and height.
Select the size of the loaded fax paper.
ON
/OFF
STANDARD
/
A4
➝
LTR/
LGL
➝
LTR
VERTICAL ONLY
/
HORIZ & VERTICAL
LTR
/A4/LGL
PRINTER SETTINGS
Name
Description
Settings