Canon FAX-L220 Скачать руководство пользователя страница 164

Страница: 164 / 202

1320

Troubleshooting

Chapter 13

General Problems

■

FAX has no power.

The power cord may not be plugged in securely.

•

Check that the power cord is plugged securely into the FAX and into the wall
outlet (

p. 27). If the unit is plugged into a power strip, make sure the

power strip is plugged in and turned on.

The power cord may not be supplying power.

•

Check the power cord by substituting with another, or by using a voltmeter
to test it for continuity.

■

Nothing appears in the LCD.

The power cord may not be plugged in securely.

•

Check that the power cord is plugged securely into the FAX and into the wall
outlet (

p. 27). If the unit is plugged into a power strip, make sure the

power strip is plugged in and turned on. If the LCD remains blank, unplug
the unit and wait five seconds, then plug it back in. If the LCD still remains
blank, contact your local authorised Canon dealer or the Canon help line.

Содержание FAX-L220











































































































































































































Результаты поиска

Содержание FAX-L220

Отзывы:

Бренды по названию

Популярные бренды

Canon FAX-L220, Руководство пользователя

Результаты поиска

Содержание FAX-L220

Отзывы:

Бренды по названию

Популярные бренды