10-22
Message
Error Code
Cause
Action
NOT AVAILABLE
#025
PUT IN CARTRIDGE
—
REC’D IN MEMORY
—
SET DOCUMENT
—
TAM MEMORY FULL
—
TX/RX CANCELLED
—
TX/RX NO.
nnnn
—
TX/RX NO.
nnnn
—
SCANNING P.
nnn
MEMORY FULL
(Three messages toggle.)
WAIT COOLING
—
Use regular dialling, or
enter a one-touch speed
dialling button or coded
speed dialling code that
only has one fax/
telephone number
registered.
Install the BJ cartridge.
(see p. 1-9)
Load paper in the multi-
purpose tray (see p. 1-13),
replace the BJ cartridge
(see p. 10-8) or clear the
paper jam (see p. 10-3).
Set or re-set the
document and press
[Start/Copy].
Listen to your telephone
messages and delete any
unnecessary messages.
Alternatively, erase all
telephone messages
stored in the fax memory.
(see p. 8-9)
If required, try sending
again.
Write the number down if
you will need it later.
The fax continues to send
the document as memory
becomes available.
Allow the fax to cool
down. The fax will
resume printing when it
has cooled down.
In manual sending,
you entered a speed
dialling number
under which a group
is registered.
There is no BJ
cartridge installed in
the fax.
The fax received the
document in memory
because paper or ink
ran out, a paper jam
occurred, or the
incorrect BJ cartridge
was installed.
The document is not
set correctly or at all.
Either 50 messages
have been recorded
or the total
maximum recording
time of 10 minutes
has been reached.
You pressed [Stop] to
cancel the
transmission.
When the fax sends
or receives a
document, it assigns
it a unique
identification number
(
nnnn
).
The fax is sending a
document and its
memory is full.
During printing, the
BJ cartridge print
head may have
become too hot.
Содержание FAX EB15
Страница 9: ...x...
Страница 54: ...HANDLING PAPER 4 HANDLING PAPER 4 Paper requirements 4 2 Printablearea 4 2 Loadingpaper 4 2...
Страница 56: ...MAKING COPIES 5 MAKING COPIES 5 Copying documents 5 2...
Страница 93: ...7 18...