Canon EOS M200, Руководство для продвинутых пользователей

Страница: 224 / 522

224
Time-lapse Movies
z
If the next scheduled shot is not possible, it will be skipped. This may shorten
the recording time of the created time-lapse movie.
z
If the time it takes to record to the card exceeds the shooting interval due to
the shooting functions set or card performance, some of the shots may not be
taken with the set intervals.
z
The captured images are not recorded as still photos. Even if you cancel the
time-lapse movie recording after only one shot is taken, it will be recorded as a
movie file.
z
If you connect the camera to a computer with the interface cable and use EOS
Utility (EOS software), set
[
z
: Time-lapse movie] to [Disable] . If an option
other than [Disable] is selected, the camera cannot communicate with the
computer.
z
During time-lapse movie recording, the lens’s Image Stabilizer will not operate.
z
Time-lapse movie recording ends if the camera is turned off, and the setting
changes to [Disable] .
z
Even if a flash is used, it will not fire.
z
The following operations cancel standby for time-lapse movie recording and
switch the setting to
[Disable] .
y
Selecting [Basic settings] in [
5
: Reset camera]
y
Using the shooting mode switch
z
If you start time-lapse movie recording while the white [
s
] icon (
=
194)
is displayed, the image quality of the time-lapse movie may deteriorate. It is
recommended that you start time-lapse movie recording after the white
[
s
]
icon disappears (camera’s internal temperature decreases).
z
With [Auto exposure] set to [Each frame] , ISO speed, shutter speed, and
aperture value may not be recorded in the time-lapse movie Exif information in
some modes.