Canon EOS M, Основное руководство пользователя

Страница: 79 / 474

79
k
Shooting Movies
During movie shooting, note the following:
If <
Q
> is set and the ISO speed or aperture changes during movie
shooting, the white balance may also change.
If you shoot a movie under fluorescent or LED lighting, the movie may flicker.
Zooming the lens during movie shooting is not recommended. Zooming the
lens can cause changes in the exposure regardless of whether the lens’
maximum aperture changes or not. Exposure changes may be recorded as a
result.
Movie-related settings are under the [
Z
1 ] tab ( 9
?
).
A movie file is recorded each time you shoot a movie. If the file size exceeds
4 GB, a new file will be automatically created.
The movie image’s field of view is approx. 100% (with movie recording size
set to [
A
]).
The sound will be recorded in stereo by the camera’s built-in microphone
(p.76).
Most commercially-available external stereo microphones with a 3.5 mm
diameter miniplug can be connected to the camera. If an external microphone
has been connected to the camera’s external microphone IN terminal (p.12),
it will be given priority the built-in microphone.
You can use the Remote Controller RC-6 (sold separately, 9
?
) to start
and stop the movie shooting if the drive mode is <
Q
>. Set the shooting
timing switch to < 2 > (2-sec. delay), then press the transmit button. If the
switch is set to <
o
> (immediate shooting), still photo shooting will take
effect.
With a fully-charged Battery Pack LP-E12, the total movie shooting time will
be as follows: approx. 1 hr. 30 min. at room temperature (23°C/73°F), and
approx. 1 hr. 20 min. at low temperature (0°C/32°F).
If the Speedlite 90EX is attached, set the Speedlite’s power to <
2
>.