Canon EOS D60, Руководство по обслуживанию

Страница: 91 / 211

Part 3: Repair Information
3-13
2.8 CMOS Sensor and A PCB
(1) CMOS sensor
1. Remove three screws and remove the CMOS sensor unit.
(2) Disassemble CMOS sensor and A PCB
1. Unsolder at three points and remove the shield case.
2. Remove three screws, then remove the LPF and LPF rubbers.
3. Unsolder the foot of the CMOS sensor from the A PCB.
4. Separate the A PCB from the CMOS sensor.
(1)
-3
(1)
-3
(1)
-3
(1)
-1
(1)
-5
(1)
-2
(1)
-4
(1)
-4
(1)
-2
(1)
-2
(1)
-1
3.0mm
3.0mm
4.5mm
4.5mm
(1)
-2
(1)
-1
ac
ac
s
s
Normally not necessary to disassemble
Fig. 3-14 CMOS sensor and A PCB
Sensor focus washers
attach here
The CMOS sensor is fragile and can be easily damaged by
the static electricity. Therefore, when handling the CMOS
sensor, use the antistatic strap, or other static electricity
protective devices
CAUTION