manualshive.com logo in svg

Canon EOS D60, Руководство по обслуживанию

Поделиться
Скачать
Canon EOS D60 Скачать руководство пользователя страница 23

Part 1: General Information

1-13

points, the AF point focusing the optimum subject is
selected automatically. If a moving subject is
detected, all three AF points are used to focus. When
one of the AF points detect a moving subject, it
switches to AI SERVO AF. Then the AF point tracking
the subject focuses the subject. If the tracked subject
moves away from the AF point, focusing is attempted
again by all three AF points. (The focus-tracking
cannot jump to another AF point.)

(2) Manual AF point selection

One or three AF points can be selected for focusing.

8-8 AF activation:

AF is activated by pressing the shutter button halfway
(SW-1)

8-9 AF operation speed: Same as EOS D30
8-10 Focus confirmation

Superimposed AF point displayed in viewfinder and 

indication:

focus confirmation beeper
* The focus confirmation beeper can be enabled or

disabled in all the shooting modes.

* With automatic AF point selection and the ONE-SHOT

AF mode, the active AF point lights in red.

* With automatic AF point selection and the AI SERVO

AF mode, there is no superimposed AF point
displayed.

8-11 AF precision:

Same as the EOS 650's

8-12 AF working range:

EV 0.5-18 (at normal temperature and ISO 100, with
the standard chart)

8-13 AF-assist beam:

(1) Beam emission: Lamp

Effective range: Approx. 3.8 m (at center), beam
coverage: 28mm (135 equivalent) lens angle covered

(2) Conditions for emission: Emitted automatically

under low light (EV 4 or lower at ISO 100)

* Emitted in shooting modes except Landscape and

Sports.

* Emission can be disabled with C.Fn-5 (including

external Speedlite).

(3) Emissions: 6 times in three bursts
* Emission stops when focus is achieved.
(4) Light source: Halogen krypton lamp
(5) With EX-, EZ-, and E-series Speedlites

• With 550EX, 540EZ, and ST-E2: The external

Speedlite's AF-assist light will be emitted regardless
of AF point selection mode (automatic or manual).

• With other EOS-dedicated Speedlites: When the

center AF point has been selected, the external
Speedlite's AF-assist light will be emitted. If a
peripheral AF point is selected, the camera's AF-
assist light will be emitted.

Содержание EOS D60




















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды