manualshive.com logo in svg

Canon EOS D60, Руководство по обслуживанию

Поделиться
Скачать
Canon EOS D60 Скачать руководство пользователя страница 32

Part 1: General Information

1-22

2) With non-Canon flash units:

On-camera unit can synchronize at 1/200 sec. or
slower.
Studio flash can synchronize at 1/60 sec. or slower
(testing recommended).

13-3 Wireless flash:

Enabled with the 550EX, 420EX, MR-14EX, MT-24EX,
or ST-E2.
* Three-group (A, B, C) slave control, a flash ratio (A:B)

setting, FEB, and modeling flash (with flash ratio) are
enabled.

* The 420EX can function as a slave, while the MR-

14EX or MT-24EX serves as the master unit.

13-4 Flash exposure compensation:

Settable with the camera or external Speedlite.
* Up to +/-2 stops in 1/3- or 1/2-stop increments.
* If flash exposure compensation is set with both the

camera and Speedlite, the Speedlite's setting will
override the camera's setting.

13-5 Flash Exposure

Settable with the 550EX, MR-14EX, or MT-24EX.

Bracketing (FEB): * Not settable with the camera.

* When the flash fails to recycle fast enough during

continuous shooting with FEB, the shutter release
locks. After the shutter button is released from the
fully depressed position, AE metering takes effect
before the flash is ready.

13-6 Modeling flash:

With the 550EX, 420EX, MR-14EX, or MT-24EX, press
the depth-of-field preview button (fires at 70 Hz for 1
sec.).

14. LCD Monitor

14-1 Type:

TFT color, liquid-crystal monitor

14-2 Monitor size:

1.8 in.

14-3 Pixels:

Approx. 114,000 pixels

14-4 Coverage:

Approx. 100% (with effective pixels)

14-5 Brightness adjustment: 2-level (standard/brighter) adjustment provided.
14-6 Refresh rate:

Approx. 1/60 sec.

14-7 Angle adjustment:

None

14-8 Protective cover:

None

15. Playback

15-1 Image display format: (1) Single image, (2) Single image (Info.), 

(3) 9-image index (4) Magnified, (5) Auto play

15-2 Display conditions: Images saved in DCF system.

* If the image is not in the DCF system, [?] is displayed

on the LCD monitor.

*

Also applicable to thumbnail images (index display).

15-3 Highlight alert:

In the single image (Info.) display mode, the highlight
portions which do not contain image information will
blink.

Содержание EOS D60




















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды